Kyocera ECOSYS MA2600cwx Operation Manual page 88

Installing and Setting up the Machine > Default Settings of the Machine
2
Configure the settings.
• When using DHCP server
• [DHCP]: On
• When setting the static IP address
• [DHCP]: Off
• [Auto-IP]: Off
• [IP Address]: Enter the address.
• [Subnet Mask]: Enter the subnet mask in decimal representation (0 to 255).
• [Default Gateway]: Enter the address.
• When using the Auto-IP
Enter "0.0.0.0" in IP Address.
• When setting the DNS server
In the following cases, set the IP address of DNS (Domain Name System) server.
• When using the host name with [DHCP] setting set to Off.
• When using the DNS server with IP address that is not assigned by DHCP automatically.
Select [Use DNS Server from DHCP] or [Use the following DNS Server]. If you selected [Use the following
DNS Server], enter the [DNS Server (Primary)] and [DNS Server (Secondary)].
IMPORTANT
After changing the setting, restart the network from System Menu, or turn the machine OFF and then
ON.
➡
Restart the network (page 486)
NOTE
Ask your network administrator for the IP address in advance, and have it ready when you configure
this setting.
79