Original Specifications Available In The Document Processor - Kyocera ECOSYS MA2600cwx Operation Manual

Operation on the Machine > Loading Originals
Original Specifications available in the Document
Processor
The document processor automatically scans each sheet of multiple originals.
Originals Supported by the Document Processor
The document processor supports the following types of originals.
Setting
Thickness
Size
No. of sheets
Originals Not Supported by the Document Processor
Do not use the document processor for the following types of originals. Otherwise, the originals may be
jammed or the document processor may become dirty.
• Originals bound with clips or staples (Remove the clips or staples and straighten curls, wrinkles or creases
before loading. Failure to do so may cause the originals to jam.)
• Originals with adhesive tape or glue
• Originals with cut-out sections
• Curled original
• Originals with folds (Straighten the folds before loading. Failure to do so may cause the originals to jam.)
• Carbon paper
• Crumpled paper
Loading Originals in the Document Processor
IMPORTANT
• Before loading originals, be sure that there are no originals left on the original eject table. Originals left on
the original eject table may cause the new originals to jam.
• Do not make an impact on the document processor top cover, such as aligning the originals on the top
cover. It may cause an error in the document processor.
• Depending on the timing of using Document Processor, the loading speed may decrease.
• Attach the Original Stopper bandled in the box when scanning legal-sized original to avoid from falling
original from tray. (The stopper may not bandle for some countries.)
2
60 to 90 g/m (duplex: 50 to 160 g/m
Maximum Folio (Legal) to Minimum A6 (Statement)
2
Plain paper 80 g/m : 50 sheets or less (Mixed size originals: 30 sheets)
Description
2
)
239