Kyocera ECOSYS MA2600cwx Operation Manual page 555

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Authentication Type
Set the authentication method. Select [Simple] or [SASL]. After changing the setting, restart the
system or turn the power off and then on.
Search Timeout
Set the amount of time to wait before time-out in seconds (from 5 to 255 seconds).
LDAP Security
Select the type of encryption according to the type of security employed by the LDAP server. The
value is [Off], [TLS] or [STARTTLS].
*1 If using Active Directory of Windows, the server name may be the same as the server name entered
in the network authentication.
* 2 For Active Directory on Windows, typically use the displayName attribute.
*3. "Name 2" can be left out. When you assign "displayName" in "Name 1" and "department" in "Name
2", and if the value of displayName is "Mike Smith" and the value of department is "Sales" in Active
Directory of Windows, the user name appears as "Mike Smith Sales".
*4 If using Active Directory of Windows, mail of Attribute may be used as E-mail Address.
*5. This function is displayed when "Server Type" is set to [Kerberos] in "Network Authentication".
3
Select [OK].
*5
546