Changing Device Information; Specify The Host Name - Kyocera ECOSYS MA2600cwx Operation Manual

Installing and Setting up the Machine > Command Center RX

Changing Device Information

1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
In the home screen [...] > [Device Information] > [Identification/Wired NW] > [Wired Network]
3 Log in with administrator privileges.
4 Click [System] from the [Device Settings] menu.
2

Specify the host name.

Enter the device information, and then click [Submit].
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON. To restart
the network interface card, click [Reset] in the [Management Settings] menu, and then click [Restart
Network] in "Restart".
129