Kyocera ECOSYS MA2600cwx Operation Manual page 485

System Menu > Network Settings
[ThinPrint]
Item
[Protocol Settings]
[ThinPrintoverTLS]
[Available Network]
[LPD]
Item
[Protocol Settings]
[Available Network]
[Raw]
Item
[Protocol Settings]
[Available Network]
Set whether to use ThinPrint. To use it, select On in these settings. The
factory default port number is 4000.
Value: Off, On
NOTE
This feature does not appear if the optional ThinPrint Option is not
running.
To use ThinPrint over TLS, select [On] for this setting, and for [TLS] in
the "SecuritySettings", select [On].
Value: Off, On
NOTE
When the setting is On, TLS certificate is required. The factory
certificate is the certificate owned by the machine.
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Set whether to send documents using LPD.
Value: Off, On
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Set whether to receive documents using the Raw Port.
Value: Off, On
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
476
Settings
*1*2
Description
*1
Description
*1