Kyocera ECOSYS MA2600cwx Operation Manual page 476

System Menu > Network Settings
TCP/IP Settings
TCP/IP
Select whether to use TCP/IP Protocol.
Value: Off, On
[IPv4 Settings]
Set up TCP/IP (IPv4) to connect to the network.
This setting is available when TCP/IP is On.
Item
DHCP
Auto-IP
IP Address
Subnet Mask
Default Gateway
DNS Server Address
Select whether to use the DHCP (IPv4) server.
Value: Off, On
Select whether to use Auto-IP.
Value: Off, On
Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to On, the value cannot be entered.
Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to On, the value cannot be entered.
Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to On, the value cannot be entered.
Set the IP address of DNS (Domain Name System) server.
Value: [Use DNS Server from DHCP], [Use the following DNS Server]
NOTE
When [Use the following DNS Server] is selected, enter the DNS
server IP address into "DNS Server (Primary)" and "DNS Server
(Secondary)".
467
Description