Kyocera ECOSYS MA2600cwx Operation Manual page 827

Appendix > About Paper
Envelopes
Envelopes should be fed from the MP tray with the print-side down or the cassette and the optional paper
feeder with the print-side up.
NOTE
Do not load paper above the load limits located on the paper width guide of the cassette and the optional
paper feeder.
Due to the structure of envelopes, printing evenly over the entire surface may not be possible in some cases.
Thin envelopes in particular may be wrinkled by the machine in some cases as they pass through. Before
purchasing envelopes in volume, try testing a sample to ensure the print quality.
Storing envelopes for a long period may cause them to become wrinkled. Thus, keep the package sealed until
you are ready to use them.
Keep the following points in mind.
• Do not use envelopes with exposed adhesive. In addition, do not use the type of envelope in which the
adhesive is exposed after the top layer is peeled off. Serious damage may be caused if the paper covering
the adhesive comes off in the machine.
• Do not use envelopes with certain special features. For example, do not use envelopes with a grommet for
winding a string to close the flap or envelopes with an open or film-covered window.
• If paper jams occur, load fewer envelopes at once.
818