Kyocera ECOSYS MA2600cwx Operation Manual page 458

System Menu > FunctionSettings
Item
[Override A4/Letter]
[Duplex]
[Copies]
[Reduced Print]
[Orientation]
[Form Feed Timeout]
[LF Action]
[CR Action]
[Job Name]
Select whether to treat A4 size and Letter, which are similar in size, as
the same size when printing.
Value
Off
A4 and Letter are not regarded as the same in size.
On
A4 and Letter are regarded as the same in size. The machine will
use whichever size is in the paper source.
Select binding orientation for duplex mode.
Value: [1-sided], [2-sided (Bind Long Edge)], [2-sided (Bind Short Edge)]
Set the default number of copies, from 1 to 999.
Value: 1 to 999 copies
Configure settings for reducing the print data and printing (reduced
printing). Set the paper size before reduction and reduction ratio.
NOTE
In reduced printing, unlike the print result of 1x size, the line width
of characters may not be constant, or lines may be seen in figures,
images, patterns, etc. Also, thin lines may not be printed. Also, if you
print the barcode in reduced size, it may not be readable.
Set the default orientation, [Portrait] or [Landscape].
Value: [Portrait], [Landscape]
Receiving print data from the computer, the machine may sometimes
wait if there is no information signaling that the last page does not
have any more data to be printed. When the preset timeout passes, the
machine automatically prints paper. The options are between 5 and 495
seconds.
Value: 5 to 495 seconds (in 5 second increments)
Set the line feed action when the machine receives the line feed code
(character code 0AH).
Value: [LF Only], [LF and CR], [Ignore LF]
Set the character return action when the machine receives the character
return code (character code 0DH).
Value: [CR Only], [LF and CR], [Ignore CR]
Set whether the job name set in the printer driver is displayed.
Value: Off, On
NOTE
If you select On, select from [Job Name], [Job No. & Job Name] or [Job
Name & Job No.] to use as the job name.
449
Description