Original/Scan Settings - Kyocera ECOSYS MA2600cwx Operation Manual

System Menu > Device Settings

Original/Scan Settings

[System Menu/Counter] key > [Device Settings] > [Original/Scan Settings]
[Auto Detect Original Size]
Set whether to use the document processor to detect the original size. Platen cannot automatically detect the
original size.
Item
[Auto (Standard Size)]
[Detect Non-standard Size (Copy)]
[Detect Non-standard Size (Send/
Store)]
[System of Units]
[Legal/OficioII/216 x 340 mm]
[Custom Original Size]
Set up frequently-used custom original size. The custom size option is displayed on the screen to select original
size.
Value
Metric
X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments)
Inch
X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
X=Length, Y=Width
Select whether to enable automatic detection of the Standard Size. The
size that can be detected is A6, B6, A5, B5, A4, and Folio in the case of
centimeter size. For inch size, Statement, Letter, and only one of Legal,
Officio II, or 216mm x 340mm.
Value: Off, On
Set whether to detect non-standard size documents in the copy
function. This setting takes precedence over the automatic (standard
size) setting.
Value: Off, On
Set whether to detect non-standard size documents in the send or save
function. This setting takes precedence over the automatic (standard
size) setting.
Value: Off, On
Select [Metric] when automatically detecting the originals in centimeter
sizes. Select [Inch] when detecting the originals in inch sizes.
Value: [Metric], [Inch]
Since the third item options to be auto detected in inch are similar in
size, set which size to use.
This function is displayed when "System of Units" is set to [Inch].
Value: [Legal], [OficioII], [216 x 340 mm]
411
Description