Command Center Rx - Kyocera ECOSYS MA2600cwx Operation Manual

Installing and Setting up the Machine > Command Center RX

Command Center RX

If the machine is connected to the network, you can configure various settings using Command Center RX. This
section explains how to access Command Center RX, and how to change security settings and the host name.
➡ Command Center RX User Guide
NOTE
To fully access the features of the Command Center RX pages, you must enter the user name and password
and log in. Entering the predefined administrator password allows the user to access all pages, including
Document Box, Address Book, and Settings on the navigation menu.
Settings that the administrator and general users can configure in Command Center RX are as follows.
Setting
Device Information/
Remote Operation
Job Status
Document Box
Address Book
Device Settings
Function Settings
Network Settings
Security Settings
Management Settings
NOTE
The fax function can be used on products equipped with fax capability. Here, information on the FAX settings
has been omitted.
➡ FAX Operation Guide
Description
The machine's structure can be checked.
Displays all device information, including print
and scan jobs, storing jobs, scheduled jobs, and
job log history.
Add or delete document boxes, or delete
documents within a document box.
The logged in user may not be able to configure
some settings, depending on the privilege of the
user.
Create, edit, or delete addresses and address
groups.
The logged in user may not be able to configure
some settings, depending on the privilege of the
user.
Configure the advanced settings of the machine.
Configure the advanced function settings.
Configure the network advanced settings.
Configure the security advanced settings.
Configure the advanced management settings.
126
Administrator General User
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
Yes No
Yes No