Wired Network Settings; Tcp/Ip Settings - Kyocera ECOSYS MA2600cwx Operation Manual

System Menu > Network Settings

Wired Network Settings

[System Menu/Counter] key > [NetworkSettings] > "Network Settings" [Wired Network Settings]
Configure Wired Network Settings.

TCP/IP Settings

TCP/IP
Select whether to use TCP/IP Protocol.
Value: Off, On
[IPv4 Settings]
Set up TCP/IP (IPv4) to connect to the network.
This setting is available when TCP/IP is On.
Item
DHCP
Auto-IP
IP Address
Subnet Mask
Default Gateway
Select whether to use the DHCP (IPv4) server.
Value: Off, On
Select whether to use Auto-IP.
Value: Off, On
Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to On, the value cannot be entered.
Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to On, the value cannot be entered.
Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to On, the value cannot be entered.
470
Description