Installing and Setting up the Machine > Command Center RX
Changing Device Information
1
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
In the home screen [Status] > [
3
Log in with administrator privileges.
4
Click [System] from the [Device Settings] menu.
2
Specify the host name.
Enter the device information, and then click [Submit].
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON. To restart the network
interface card, click [Reset] in the [Management Settings] menu, and then click [Restart Network] in
"Restart".
][
] key > [Network] > [OK] key[]
81