In A Gravel Bed; Mirror Removal And Installation - BMW S 1000 RR Rider's Manual

In a gravel bed

6
with BMW Motorrad Race ABS
OE
and DTC
90
DTC shut-off
On very loose substrates (e.g. a
gravel bed on a racetrack), the
control interventions of the DTC
can attenuate the drive force
on the rear wheel until the rear
wheel no longer turns. In this
case, BMW Motorrad recom-
mends switching off the DTC
temporarily.
Note that the rear wheel will spin
z
in the loose substrate, and close
the throttle in a timely manner
before reaching a solid substrate.
Then, switch the DTC back on.
Mirror removal and
installation
Removing mirror
Make sure ground is level and
firm and park motorcycle.
Remove nuts 1 on left and
right and take off mirror.
Secure the paneling 2 on the
left and right to the fairing
bracket 3. If cable ties are
used, protect possible locations
of abrasion marks using an
adhesive strip.
Use the HP Race Cover
Kit from BMW Motorrad to
cover the exposed screw sock-
ets and secure the mounting
attachment.
Installing mirrors
Make sure ground is level and
firm and park motorcycle.
Remove fairing fastener.