Abbreviations - Danfoss VACON 1000 Operating Manual

Operating Guide | VACON® 1000
Table 56: Standards
(continued)
Standard number
IEC 61000-4-7:2002
+AMD1:2008 CSV
EN 61000-4-8:2010
EN 61000-4-11:2004
IEC 61000-2-5:2017 RLV
IEC 61800-3
IEC 61800-4
IEC 61800-5-1
IEC61800-9-2
ISO/EN 12944-2
GR-63, Issue 4:2012
NR-10
NEMA MG 1-2016
ASCE/SEI 7-10
UL 61800-5-1
UL347A
C22.2 No. 274-17

11.9 Abbreviations

Term Definition
AFE Active front end
AI Analog input
AO Analog output
CPU Central processing unit
DCS Digital control signal
DI Digital input
DO Digital output
Danfoss A/S © 2024.12
Standard Name
Electromagnetic compatibility (EMC) – Part 4-7: Testing and measurement techniques – General guide
on harmonics and inter-harmonics measurements and instrumentation, for power supply systems and
equipment connected thereto
Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency mag-
netic field immunity test (Immunity only)
Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short inter-
ruptions and voltage variations immunity tests (Immunity only)
Electromagnetic compatibility (EMC) – Part 2-5: Environment – Description and classification of elec-
tromagnetic environments
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications
for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical , thermal
and energy
Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor
starters, power electronics and their driven applications-Energy efficiency indicators for power drive
systems and motor starters
Paints and varnishes- corrosion protection of steel structures by protective paint system – Part 2: Clas-
sification of environments
NEBS Requirements: Physical Protection
Safety in electrical Installations and Services
Motors and Generators: Part 30 Application Considerations for Constant Speed Motors Used on a Sinu-
soidal Bus with Harmonic Content and General Purpose Motors Used With Adjustable-Voltage or Ad-
justable-Frequency Controls or Both
Minimum Design Loads for Buildings and Other Structures
Standard for Adjustable Speed Electrical Power Drive Systems - Part 5-1: Safety Requirements - Electri-
cal, Thermal and Energy
Standard for safety-Medium voltage power conversion equipment
Standard for Adjustable Speed Drives
Specifications
AQ363633621020en-000401 / 172F3117D | 191