Danfoss VACON 1000 Operating Manual page 11

Operating Guide | VACON® 1000
2 Safety
2.1 Safety Symbols
The following symbols are used in Danfoss documentation.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).
The guide also includes ISO warning symbols related to hot surfaces and burn hazard, high voltage and electrical shock, and referring to
the instructions.
ISO warning symbol for hot surfaces and burn hazard
ISO warning symbol for high voltage and electrical shock
ISO action symbol for referring to the instructions
2.2 Qualified Personnel
To allow trouble-free and safe operation of the unit, only qualified personnel with proven skills are allowed to transport, store, assemble,
install, program, commission, maintain, and decommission this equipment.
Persons with proven skills:
Are qualified electrical engineers or persons who have received training from qualified electrical engineers and are suitably
l
experienced to operate devices, systems, plants, and machinery in accordance with pertinent laws and regulations.
Are familiar with the basic regulations concerning health and safety/accident prevention.
l
Have read and understood the safety guidelines given in all guides provided with the unit, especially the instructions given in the
l
operating guide of the drive.
Have good knowledge of the generic and specialist standards applicable to the specific application.
l
Are familiar with the structure and operation of medium-voltage drives and the related risks. Special training for medium-voltage
l
installations may be necessary.
Danfoss A/S © 2024.12
DANGER
WARNING
CAUTION
NOTICE
AQ363633621020en-000401 / 172F3117D |
Safety
11