Docking The Nec Versa - NEC VERSA DOCKING STATION 6000 Manual

DOCKING THE NEC VERSA

You can dock the NEC Versa in one of two modes:
n
n
n
Use the following steps to dock your NEC Versa.
1.
2.
2-6 Docking/Undocking the NEC Versa
Cold Docking – with NEC Versa system power off. This method works
for all NEC Versa models that support docking.
Warm Docking – with NEC Versa power on and the system in Suspend
mode. This procedure can be used with NEC Versa 6000 systems with
the Windows 95 operating system.
Hot Docking – with NEC Versa power on. This procedure can be used
with NEC Versa 6000 systems with the Windows 95 operating system.
Locate the expansion connector on the docking station.
Set the NEC Versa on the docking station and align the expansion port
and connector.
Stowing the expansion port cover
Locating the expansion connector