Cover Removal - NEC VERSA DOCKING STATION 6000 Manual

COVER REMOVAL

Follow these steps to remove the docking station cover.
Make sure docking station power is off, the NEC Versa is not
docked, peripheral devices are disconnected, and cables are de-
tached from the docking station before beginning installation proce-
dures.
1.
2.
3.
4.
4-2 Adding Options
Turn the Docking Lock to the Manual position for easier cover removal
and replacement
Remove the CRT Base from the docking station.
Locate and remove the two screws next to the expansion connector.
Locate and unscrew the thumbscrews on the back of the docking station.
WARNING
Locating two screws