NEC IE-703217-G1-EM1 User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Computer Accessories
  5. IE-703217-G1-EM1
  6. User manual
NEC IE-703217-G1-EM1 User Manual

NEC IE-703217-G1-EM1 User Manual

Emulation board
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
IE-703217-G1-EM1
Emulation Board
Target Devices
V850ES/KF1
V850ES/KG1
V850ES/KJ1
Document No.
U16594EJ1V0UM00 (1st edition)
Date Published September 2003 N CP(K)
Printed in Japan
TM
TM
TM
2003

Advertisement

Table of Contents
loading

Related Manuals for NEC IE-703217-G1-EM1

Summary of Contents for NEC IE-703217-G1-EM1

  • Page 1 User’s Manual IE-703217-G1-EM1 Emulation Board Target Devices V850ES/KF1 V850ES/KG1 V850ES/KJ1 Document No. U16594EJ1V0UM00 (1st edition) Date Published September 2003 N CP(K) 2003 Printed in Japan...
  • Page 2 [MEMO] User’s Manual U16594EJ1V0UM...
  • Page 3 NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
  • Page 4 Regional Information Some information contained in this document may vary from country to country. Before using any NEC Electronics product in your application, pIease contact the NEC Electronics office in your country to obtain a list of authorized representatives and distributors. They will verify: •...
  • Page 5 Use the IE-703217-G1-EM1 connected to the in-circuit emulator (IE-V850ES-G1). This manual describes the basic setup procedures and switch settings of the IE-703217-G1-EM1 and IE-V850ES-G1. For the part names, functions, and configuration parts of the IE-V850ES-G1, refer to the IE-V850ES-G1 User’s Manual (U16313E) provided separately.
  • Page 6 However, preliminary versions are not marked as such. Documents Related to Development Tools (User’s Manuals) Document Name Document Number IE-V850ES-G1 (In-Circuit Emulator for V850ES) U16313E IE-703217-G1-EM1 (In-Circuit Emulator Emulation Board for V850ES/KF1, V850ES/KG1, This manual V850ES/KJ1) V850ES/KF1, V850ES/KG1, V850ES/KJ1 Hardware U15862E CA850 Ver.2.50 C Compiler Package...

  • Page 7: Table Of Contents

    1.3 Function Specifications (When Connected to IE-V850ES-G1) ..........13 1.4 System Configuration......................14 1.5 Contents in Carton.........................15 CHAPTER 2 PART NAMES AND FUNCTIONS..................16 2.1 Part Names and Functions of IE-703217-G1-EM1 ...............16 2.2 LEDs Controlled by IE-703217-G1-EM1................18 CHAPTER 3 SWITCH SETTINGS .......................19 3.1 Clock Settings ........................19 3.2 Pull-Up Resistor Settings ......................20...
  • Page 8 Figure No. Title Page System Configuration ............................14 Contents in Carton.............................15 Part Names of IE-703217-G1-EM1........................16 LEDs Controlled by IE-703217-G1-EM1......................18 JP4 Settings at Shipment ..........................21 Changing Power-ON Threshold Voltage......................21 Opening/Closing Cover Step 1 (Removing Front Cover 1)................23 Opening/Closing Cover Step 1 (After Removing Front Cover 1) ...............24 Opening/Closing Cover Step 2 (Loosening Screws) ..................25...
  • Page 9 LIST OF TABLES Figure No. Title Page Main Clock Settings............................19 Pull-Up Resistor Settings...........................20 Regulator Output Stabilization Capacitance Settings..................22 Pin Correspondence List (V850ES/KJ1 Pin Names) ..................35 Pin Correspondence List (V850ES/KG1 Pin Names) ..................39 Pin Correspondence List (V850ES/KF1 Pin Names)..................42 User’s Manual U16594EJ1V0UM...

  • Page 10: Chapter 1 Outline

    V850ES/KF1, V850ES/KG1, and V850ES/KJ1. This manual describes the basic setup procedure and the switch settings of the IE-V850ES-G1 when connected to the IE-703217-G1-EM1. For the part names and functions of the IE-V850ES-G1, refer to the separate IE-V850ES-G1 User’s Manual (U16313E).

  • Page 11: Product Configuration

    The IE-V850ES-G1 can be used as an in-circuit emulator for Emulation board (IE-703217-G1-EM1) the V850ES/KF1, V850ES/KG1, and V850ES/KJ1 by installing the IE-703217-G1-EM1 board. Separately-sold products Sockets Package conversion sockets made by NEC Electronics EV-703210GC EV-703210GC: For V850ES/KF1 (GC package) EV-703210GK: For V850ES/KF1 (GK package) EV-703210GK EV-703214GC: For V850ES/KG1 EV-703214GC...

  • Page 12: Features

    CHAPTER 1 OUTLINE 1.2 Features • Maximum operating frequency: 20 MHz (2.7 V to 5.5 V) • The following pins can be masked. NMI, WAIT, RESET, HLDRQ • The external dimensions of the IE-703217-G1-EM1 are listed below Item Value External dimensions Height...

  • Page 13: Function Specifications (When Connected To Ie-V850Es-G1)

    CHAPTER 1 OUTLINE 1.3 Function Specifications (When Connected to IE-V850ES-G1) Item Specification Emulation memory capacity Internal ROM 1 MB For user memory 4 MB Execution/pass detection coverage memory capacity Internal ROM 256 KB External memory 1 MB Memory access detection coverage memory capacity External memory 1 MB Branch destination entry count calculation coverage...

  • Page 14: System Configuration

    CHAPTER 1 OUTLINE 1.4 System Configuration The system configuration when using the IE-703217-G1-EM1 connected to the IE-V850ES-G1, which itself is connected to a PC (PC-9800 series or PC/AT compatible) is shown below. Figure 1-1. System Configuration <10> <7> Target connector connection example (enlarged view) <6>...

  • Page 15: Contents In Carton

    CHAPTER 1 OUTLINE 1.5 Contents in Carton The IE-703217-G1-EM1 package contains the IE-703217-G1-EM1 emulation board, a guarantee card, a packing list, this manual, and an accessory bag. Check whether the accessory bag contains the items listed below. If you find any missing or damaged items, contact an NEC Electronics sales representative or distributor.

  • Page 16: Chapter 2 Part Names And Functions

    CHAPTER 2 PART NAMES AND FUNCTIONS This chapter describes the part names and functions of the IE-703217-G1-EM1. For the part names and functions of the IE-V850ES-G1, refer to the IE-V850ES-G1 User’s Manual (U16313E). 2.1 Part Names and Functions of IE-703217-G1-EM1 Figure 2-1.
  • Page 17 CHAPTER 2 PART NAMES AND FUNCTIONS (1) Emulation probe cable connection connectors (CN5, CN6, CN7) Connect the supplied probe cable. (2) Main clock resonator socket (OSC1) This socket is used to connect the main clock resonator. (For details, refer to 3.1 Clock Settings.) (3) Subclock resonator socket (OSC2) This socket is used to connect the subclock resonator.

  • Page 18: Leds Controlled By Ie-703217-G1-Em1

    CHAPTER 2 PART NAMES AND FUNCTIONS 2.2 LEDs Controlled by IE-703217-G1-EM1 Some of the LEDs mounted in the IE-V850ES-G1 are controlled by the IE-703217-G1-EM1. For the LEDs that are controlled by the IE-V850ES-G1, refer to the IE-V850ES-G1 User’s Manual (U16313E).

  • Page 19: Chapter 3 Switch Settings

    3.1 Clock Settings Table 3-1 lists the main clock settings. For the locations of OSC1 and X1, refer to Figure 2-1. Since only the 32.768 kHz resonator on the IE-703217-G1-EM1 is connectable for the subclock, the oscillator cannot be changed.

  • Page 20: Pull-Up Resistor Settings

    CHAPTER 3 SWITCH SETTINGS 3.2 Pull-Up Resistor Settings Table 3-2 lists the settings for pull-up resistor emulation, which is a mask option of the V850ES/KF1, V850ES/KG1, and V850ES/KJ1. For the location of SW1, refer to Figure 2-1. Table 3-2. Pull-Up Resistor Settings Port P614 P615...

  • Page 21: Power-On Threshold Voltage Settings

    CHAPTER 3 SWITCH SETTINGS 3.3 Power-ON Threshold Voltage Settings The threshold voltage used to judge whether the target system is connected (hereafter called "power-ON threshold voltage") is set to 1.7 V at shipment. (Refer to Figure 3-1 JP4 Settings at Shipment.) To change this threshold voltage, insert a 4-pin jumper (standard accessory) on which resistors have been mounted to JP4 as shown in Figure 3-2.

  • Page 22: Regulator Output Stabilization Capacitance Setting Jumpers

    CHAPTER 3 SWITCH SETTINGS 3.4 Regulator Output Stabilization Capacitance Setting Jumpers These are the jumpers for connecting the capacitance for stabilizing the output when using the regulator of the V850ES/KF1, V850ES/KG1, or V850ES/KJ1. For the location of JP7 and JP8, refer to Figure 2-1. A 10 µ F electrolytic capacitor is mounted on JP8 at shipment.

  • Page 23: Chapter 4 Setup Procedure

    This chapter describes how to connect the IE-703217-G1-EM1 and related products. 4.1 Removing Probe and Replacing Clock Module <1> Hold the IE-703217-G1-EM1 by placing the fingers at the two locations indicated by the arrows and pull out front cover 1.
  • Page 24 CHAPTER 4 SETUP PROCEDURE <2> Then remove the probe and change the clock. Figure 4-2. Opening/Closing Cover Step 1 (After Removing Front Cover 1) User’s Manual U16594EJ1V0UM...

  • Page 25: Removing Emulation Board

    CHAPTER 4 SETUP PROCEDURE 4.2 Removing Emulation Board <1> Place the case down horizontally. <2> Disconnect the power supply cable and the host interface cable. <3> Refer to 4.1 Removing Probe and Replacing Clock Module for the procedure up to the removal of front cover 1.
  • Page 26 CHAPTER 4 SETUP PROCEDURE <5> Holding front cover 2 down, lift the case using the hinges that connect front cover 2 to the rear panel of the case until the case stands vertically. Figure 4-4. Opening/Closing Cover Step 2 (Lifting Front Cover 2) Front cover 2 User’s Manual U16594EJ1V0UM...
  • Page 27 CHAPTER 4 SETUP PROCEDURE <6> Remove the 6 screws on the board indicated by the arrows, and replace the board. Figure 4-5. Opening/Closing Cover Step 2 (After Lifting Front Cover 2) User’s Manual U16594EJ1V0UM...

  • Page 28: Probe Cable Connection

    CHAPTER 4 SETUP PROCEDURE 4.3 Probe Cable Connection The probe cable is connected to the IE-703217-G1-EM1 at shipment. To remove the probe cable, use the following procedure. (1) To remove the probe cable <1> Remove front cover 1 of the case.

  • Page 29: Chapter 5 Cautions

    CHAPTER 5 CAUTIONS The following cautions apply to the IE-703217-G1-EM1. • Target system connection Before connecting the IE-703217-G1-EM1 and the target system, be sure to set the power supply switch of the IE-V850ES-G1 to OFF. • V850ES/KF1 emulation To perform V850ES/KF1 emulation with the target board unconnected, do so after connecting the conversion adapter (GEA) supplied with the EV-703210GK or EV-703210GC to the probe cable.

  • Page 30: Chapter 6 Restrictions

    CHAPTER 6 RESTRICTIONS The following restrictions apply to the IE-703217-G1-EM1. Permanent restrictions (1) Clock generator • Emulation of oscillation stabilization time after reset release An oscillation stabilization time is inserted after reset release for the emulation target device, but no oscillation stabilization time is inserted in the in-circuit emulator.

  • Page 31: Appendix A Target Interface Characteristics

    APPENDIX A TARGET INTERFACE CHARACTERISTICS From a functional aspect, the target interface (signals that connect the in-circuit emulator and target system) appears to operate as if an actual device were connected, but there may be differences with the actual device from a performance aspect.
  • Page 32 APPENDIX A TARGET INTERFACE CHARACTERISTICS Figure A-4. Equivalent Circuit D Target system side IE system side µPC393G2 IIx- (comparator) 100 Ω 1 MΩ µPC741G2 G6H-2F Note (operational (relay 0.1 µF amplifier) Note Conducts only when a target system is connected. Figure A-5.
  • Page 33 APPENDIX A TARGET INTERFACE CHARACTERISTICS Figure A-7. Equivalent Circuit G Target system side IE system side µPD70F3217 74HC157 OSC1 emulation CPU 74LCX04 74LCX04 Open Figure A-8. Equivalent Circuit H Target system side IE system side µPD70F3217 emulation CPU User’s Manual U16594EJ1V0UM...
  • Page 34 APPENDIX A TARGET INTERFACE CHARACTERISTICS Figure A-9. Equivalent Circuit I Same potential as V target system, or 5 V Target system side IE system side Open Same potential as V µPD70F3217 target system, or 5 V emulation CPU REGC REGC Open Figure A-10.

  • Page 35: Pin Correspondence List (V850Es/Kj1 Pin Names)

    APPENDIX A TARGET INTERFACE CHARACTERISTICS Table A-1. Pin Correspondence List (V850ES/KJ1 Pin Names) (1/4) V850ES/KJ1 Target Interface Name In-Circuit Emulator Pin No. (V850ES/KJ1 Pin Name) Processing Equivalent circuit E REF0 Equivalent circuit H P10/ANO0 Equivalent circuit A P11/ANO1 Equivalent circuit A Equivalent circuit E REF1 P00/TOH0...
  • Page 36 APPENDIX A TARGET INTERFACE CHARACTERISTICS Table A-1. Pin Correspondence List (V850ES/KJ1 Pin Names) (2/4) V850ES/KJ1 Target Interface Name In-Circuit Emulator Pin No. (V850ES/KJ1 Pin Name) Processing P54/SOA0/RTP04/KR4 Equivalent circuit A P55/SCKA0/RTP05/KR5 Equivalent circuit A P60/RTP10 Equivalent circuit A P61/RTP11 Equivalent circuit A P62/RTP12 Equivalent circuit A P63/RTP13...
  • Page 37 APPENDIX A TARGET INTERFACE CHARACTERISTICS Table A-1. Pin Correspondence List (V850ES/KJ1 Pin Names) (3/4) V850ES/KJ1 Target Interface Name In-Circuit Emulator Pin No. (V850ES/KJ1 Pin Name) Processing PCS0/CS0 Equivalent circuit B PCS1/CS1 Equivalent circuit B PCS2/CS2 Equivalent circuit B PCS3/CS3 Equivalent circuit B PCM0/WAIT Equivalent circuit B PCM1/CLKOUT...
  • Page 38 APPENDIX A TARGET INTERFACE CHARACTERISTICS Table A-1. Pin Correspondence List (V850ES/KJ1 Pin Names) (4/4) V850ES/KJ1 Target Interface Name In-Circuit Emulator Pin No. (V850ES/KJ1 Pin Name) Processing PDH0/A16 Equivalent circuit B PDH1/A17 Equivalent circuit B PDH2/A18 Equivalent circuit B PDH3/A19 Equivalent circuit B PDH4/A20 Equivalent circuit B PDH5/A21...
  • Page 39 APPENDIX A TARGET INTERFACE CHARACTERISTICS Table A-2. Pin Correspondence List (V850ES/KG1 Pin Names) (1/3) V850ES/KG1 Target Interface Name In-Circuit Emulator Pin No. (V850ES/KG1 Pin Name) Processing Equivalent circuit E REF0 Equivalent circuit H P10/ANO0 Equivalent circuit A P11/ANO1 Equivalent circuit A Equivalent circuit E REF1 P00/TOH0...
  • Page 40 APPENDIX A TARGET INTERFACE CHARACTERISTICS Table A-2. Pin Correspondence List (V850ES/KG1 Pin Names) (2/3) V850ES/KG1 Target Interface Name In-Circuit Emulator Pin No. (V850ES/KG1 Pin Name) Processing P54/SOA0/RTP04/KR4 Equivalent circuit A P55/SCKA0/RTP05/KR5 Equivalent circuit A P90/A0/TXD1/KR6 Equivalent circuit C P91/A1/RXD1/KR7 Equivalent circuit C P92/A2/TI020/TO02 Equivalent circuit C P93/A3/TI021...

  • Page 41: Pin Correspondence List (V850Es/Kg1 Pin Names)

    APPENDIX A TARGET INTERFACE CHARACTERISTICS Table A-2. Pin Correspondence List (V850ES/KG1 Pin Names) (3/3) V850ES/KG1 Target Interface Name In-Circuit Emulator Pin No. (V850ES/KG1 Pin Name) Processing PDL10/AD10 Equivalent circuit B PDL11/AD11 Equivalent circuit B PDL12/AD12 Equivalent circuit B PDL13/AD13 Equivalent circuit B PDL14/AD14 Equivalent circuit B PDL15/AD15...
  • Page 42 APPENDIX A TARGET INTERFACE CHARACTERISTICS Table A-3. Pin Correspondence List (V850ES/KF1 Pin Names) (1/2) V850ES/KF1 Target Interface Name In-Circuit Emulator Pin No. (V850ES/KF1 Pin Name) Processing Equivalent circuit E REF0 Equivalent circuit H P00/TOH0 Equivalent circuit A P01/TOH1 Equivalent circuit A P02/NMI Equivalent circuit A P03/INTP0...
  • Page 43 APPENDIX A TARGET INTERFACE CHARACTERISTICS Table A-3. Pin Correspondence List (V850ES/KF1 Pin Names) (2/2) V850ES/KF1 Target Interface Name In-Circuit Emulator Pin No. (V850ES/KF1 Pin Name) Processing P97/A7/SI01 Equivalent circuit C P98/A8/SO01 Equivalent circuit C P99/A9/SCK01 Equivalent circuit C P913/A13/INTP4 Equivalent circuit C P914/A14/INTP5 Equivalent circuit C P915/A15/INTP6...

  • Page 44: Appendix B External Views

    APPENDIX B EXTERNAL VIEWS (1) EV-703210GC (for 80GC) Unit: mm Dimensions with GX-Probe connected Dimensions with IC mounted 24.1 21.8 25.3 14.4 12.8 Target connector for 80GC C1.5 80-14-0.65 CTC APAN TOP VIEW BOTTOM VIEW User’s Manual U16594EJ1V0UM...
  • Page 45 APPENDIX B EXTERNAL VIEWS Conversion adapter for 80GC C1.5 JAPAN 1 1 1 1 JAPAN 703210GC-EA-B 703210GC-EA-B TOP VIEW BOTTOM VIEW IC mounting adapter for 80GC 24.1 C2.0 3-R2.5 C1.5 1 1 1 1 080SB TOP VIEW BOTTOM VIEW User’s Manual U16594EJ1V0UM...
  • Page 46 APPENDIX B EXTERNAL VIEWS (2) EV-703210GK (for 80GK) Unit: mm Dimensions with GX-Probe connected Dimensions with IC mounted 21.0 21.8 25.3 14.4 12.8 Target connector for 80GK C1.5 GTC80 -12-0.5 AL JAPAN TOP VIEW BOTTOM VIEW User’s Manual U16594EJ1V0UM...
  • Page 47 APPENDIX B EXTERNAL VIEWS Conversion adapter for 80GK C1.5 JAPAN 703210GK-EA-B 1 1 1 1 2 2 2 2 JAPAN CN1-H CN1-H 1 1 1 1 TOP VIEW BOTTOM VIEW IC mounting adapter for 80GK 3-R2.5 C2.0 C1.5 GMA80-12-0.5 080SB TOP VIEW BOTTOM VIEW User’s Manual U16594EJ1V0UM...
  • Page 48 APPENDIX B EXTERNAL VIEWS (3) EV-703214GC (for 100GC) Unit: mm Dimensions with GX-Probe connected Dimensions with IC mounted 21.8 25.3 14.4 12.8 Target connector for 100GC C1.5 GTC100 -14-0.5 JAPAN TOP VIEW BOTTOM VIEW User’s Manual U16594EJ1V0UM...
  • Page 49 APPENDIX B EXTERNAL VIEWS Conversion adapter for 100GC C1.5 GEA100-14-0.5 GEA100-14-0.5 JAPAN 1 1 1 1 JAPAN TOP VIEW BOTTOM VIEW IC mounting adapter for 100GC C1.5 4-Ø3.2 GMA100-14-0.5 100SD TOP VIEW BOTTOM VIEW User’s Manual U16594EJ1V0UM...
  • Page 50 APPENDIX B EXTERNAL VIEWS (4) EV-703217GJ (for 144GJ) Unit: mm Dimensions with GX-Probe connected Dimensions with IC mounted 21.8 25.3 14.4 12.8 Target connector for 144GJ C1.5 1 1 1 TC-144-20-0.5 JAPAN TOP VIEW BOTTOM VIEW User’s Manual U16594EJ1V0UM...
  • Page 51 APPENDIX B EXTERNAL VIEWS Conversion adapter for 144GJ C1.5 EA-144-20-0.5 EA-144-20-0.5 JAPAN JAPAN TOP VIEW BOTTOM VIEW IC mounting adapter for 144GJ C2.0 3-R2.5 1 1 1 144 SD TOP VIEW BOTTOM VIEW User’s Manual U16594EJ1V0UM...
  • Page 52 APPENDIX B EXTERNAL VIEWS (5) Emulation probe cable Unit: mm (44) (400) (39) GXP-CABLE-TARGET GXP-CABLE-EML MADE IN JAPAN JAPAN User’s Manual U16594EJ1V0UM...

Table of Contents