Table of Contents
Advertisement
3.
Push against the front of the NEC Versa to put it in position to dock.
Keep the notebook computer aligned evenly with the connector. Firmly
push against the center of the computer or push with equal pressure
against the left front and right front of the NEC Versa.
Keep the NEC Versa straight. If the computer is pushed at an
angle, it does not dock properly.
To prevent connector damage, the docking mechanism will not start
to dock if the expansion connectors are not aligned properly. If this
occurs, adjust the NEC Versa position by lifting the front of the com-
puter or shifting it left or right.
The sensor inside the docking connector detects the NEC Versa and
initiates the mechanical docking sequence. The mechanism pulls the NEC
Versa in and docks it. Some noise during docking is normal. When
docking is successful, the Docking LED lights a steady yellow.
Docking the NEC Versa
Docking/Undocking the NEC Versa 2-7
Advertisement
Table of Contents
