Docking The Nec Versa; Docking Status Leds - NEC VERSA MINIDOCK 6000 Service Manual

Docking the NEC Versa

Dock the NEC Versa in one of the following modes:
T
Cold Docking — with NEC Versa system power off. This method works
for all NEC Versa models that support docking.
T
Warm Docking — with NEC Versa power on, the system in Suspend
mode, and MiniDock power on. This procedure can be used with NEC
Versa systems that run the Windows 95 operating system.
T
Hot Docking — with NEC Versa power on and the system in full opera-
tion mode. This procedure can be used with NEC Versa systems with the
Windows 95 operating system.
Use the following steps to dock the NEC Versa.
Locate the AC Port Guard on the MiniDock. You may need to adjust the
1.
guard position to suit the size of your system. For wider systems that
need more room, slide the guard away from the MiniDock.
Locate the docking connector and the docking guides on the MiniDock.
2.
Figure 2-5 Docking Status LEDs
Setup and Operation 2-5