NEC VERSA DOCKING STATION 6000 Manual page 31

Check the status of the lock. You cannot undock the NEC Versa if the
3.
lock is in the Locked or Manual position.
Press the Eject button on the front panel of the docking station.
4.
To use Windows 95 software to undock the NEC Versa, locate the Eject
icon on the screen and click. The software puts your NEC Versa into
Suspend mode and initiates the undocking sequence.
If the NEC Versa does not eject properly using the front panel
Eject button, go to the next section "Emergency Undocking."
Once the connection is broken, pull the NEC Versa forward and remove
5.
it from the docking station.
Eject button and lock location
Docking/Undocking the NEC Versa 2-11