Emergency Undocking - NEC VERSA DOCKING STATION 6000 Manual

Emergency Undocking

You may need to undock your NEC Versa when power to the docking
station is unavailable or is unexpectedly interrupted.
When necessary, use the following emergency undocking procedure to
undock the NEC Versa:
1.
mode, turn off the main power switch on the back of the docking
station before continuing.
2.
3.
4.
2-12 Docking/Undocking the NEC Versa
If possible, turn off NEC Versa power or put the system into Suspend
mode (a half moon is displayed on the LCD panel).
If the NEC Versa cannot be powered off or put into Suspend
Turn the docking station key to the Manual position:
Close the NEC Versa LCD panel.
Pull the NEC Versa forward and lift it out of the docking station.
Removing the NEC Versa