Setting Up And Using The Software; Plug And Play Systems - NEC VERSA DOCKING STATION 6000 Manual

Setting Up and
3
Using the Software
Your Docking Station 6000 comes with all the software you need to get it up
and running. The docking station setup utility installs the following onto
your NEC Versa 6000 hard disk drive:
n
n
n
n
To set up your docking station, go to one of the following sections in this
chapter:
n
n

PLUG AND PLAY SYSTEMS

Plug and Play systems, like the NEC Versa 6000 with the Windows 95
operating system and Plug and Play BIOS, require no special software
installation. To install the online version of the docking station user's guide
on your NEC Versa, simply follow the instructions in "Running the Setup
Utility."
The NEC Versa 6000 with Windows 95 as its operating system supports
Plug and Play options in the docking station. Simply install the option, dock
the NEC Versa 6000, and reboot the system. The option is automatically
configured. (Some options may require that you install specific option driv-
ers. Check the guide that came with the option to determine if this is true of
the option you plan to install.)
Online Docking Station User's Guide (called the Docking Station Guide)
Intel Plug and Play Kit (Windows for Workgroups systems only)
EZ-SCSI drivers
Docking Station drivers and message handler.
Go to "Running the Setup Utility."
If you are extremely familiar with software setup programs and the NEC
Versa family of computers, the "Quick Start" section at the end of this
chapter may be all you need.

Setting Up and Using the Software 3-1