NEC VERSA DOCKING STATION 6000 Manual page 50

6.
7.
8.
9.
4-10 Adding Options
Press the board firmly until it is securely seated in the connector. You
may have to rock the board side-to-side.
Insert the screw to attach the board to the support bracket.
Repeat steps 2 through 7 to install a second or third expansion board.
Once you install the boards, continue as follows:
n
To add drives, continue to the next section, "Data Storage Devices."
n
If you have no more options to install, replace the docking station
cover as described in "Cover Replacement" earlier in this chapter.
Aligning the board edge and connector
Securing the board