Selective Application Restore Program - NEC POWERMATE ENTERPRISE NETPC Service Manual

2-36 Technical Information

Selective Application Restore Program

After the operating system is up and running, the System Administrator can begin phase
two, allowing installation of the applications associated with the OS. Use this process to
reinstall selected applications at any time.
Place the Select Install CD in the LCM CD tray.
1.
On the Client desktop, double click
2.
Double click
3.
reader.
4. Double click the
The NEC Selective Application Restore Program screen appears.
Figure 2-14 Selective Application Restore Program Screen
Select the applications you want to install by double clicking the item box or line.
5.
A check mark appears in the box.
To deselect an item, double click it again so that the check mark disappears.
and do a map connection to the LCM CD-ROM
Entire Network
program.
selrest.exe
NOTE: Only the applications that work with the
system's OS appear in the Select Install Program
screen. For example, if the OS is Windows 95,
but there are applications for both Windows 95
and Windows NT 4.0 on the CD, only the drivers
required for Windows 95 appear.
Network Neighborhood
.