Removing The Retaining Bracket And Filler Panel - NEC POWERMATE ENTERPRISE NETPC Service Manual

5-20 Disassembly and Reassembly
Figure 5-15 Removing the Retaining Bracket and Filler Panel
Install PCI card (see Figure 5-16, C).
7.
8. Reinstall retaining bracket with the screw(see Figure 5-16, D).
9. Reattach the top and bottom halves of the chassis (see "Closing the System
Chassis" in Section 3).
Replace the front bezel (see "Front Bezel").
10.
Replace the system unit top cover (see "System Unit Top Cover").
11.
Connect the power cord and monitor and peripheral cables.
12.
B.
A.