Replacement - NEC POWERMATE ENTERPRISE NETPC Service Manual

Figure 5-1 Removing the System Unit Top Cover

Replacement

To replace the system unit top cover, proceed as follows:
1. Complete steps 1 through 5 in the previous subsection.
Place the cover on top of the chassis with the front edge slightly forward (see
2.
Figure 5-2, A).
Place your hands on the rear corners of top cover and push down and back to
3.
slide the cover into position.
Connect the power cord and peripheral cables to the system.
4.
Disassembly and Reassembly 5-5