Table of Contents
Advertisement
4.
Bow bottom cover out (toward the front, near the center) as shown in
Figure 5-18.
Slide the bottom cover out to disengage it from the chassis.
5.
Replacement
To replace the bottom cover, proceed as follows:
Complete steps 1 through 4 in the previous subsection.
1.
Lay the bottom cover on a flat surface.
2.
3.
Position the chassis over the bottom cover (see Figure 5-19).
4.
Engage the locking tabs on the bottom cover with the slots in the chassis.
Slide the chassis forward until the tabs lock in place in the slots.
5.
Figure 5-18 Removing the Bottom Cover
Disassembly and Reassembly
5-23
Advertisement
Table of Contents
Troubleshooting
