Keyboard Configuration; Dmi Event Logging - NEC POWERMATE ENTERPRISE NETPC Service Manual

T
LAN
This field configures the LAN device. The default setting is "Enabled."
T
Legacy USB Support
This field enables (the default ) or disables support for legacy Universal Serial Bus
(USB) devices.
T
Hardware Monitor
This field enables (the default) or disables the on-board hardware monitor device.

Keyboard Configuration

Use this field to adjust the following keyboard features:
T
Numlock
This field controls whether the Num Lock key on the keyboard is "On" or "Off"
at bootup. The default setting for this field is "Auto."
T
Key Click
This field turns audible key click on or off. The default is "Disabled."
T
Keyboard Auto-Repeat Rate
This field sets the number of times per second to repeat a keystroke when the key
is held down. Options include 2, 6, 10, 13.3, 18.5, 21.8, 26.7, or 30 clicks per
second. The default is "30."
T
Keyboard Auto-Repeat Delay
This field controls the speed characters repeat when a keyboard key is held down.
The higher the number the faster the repeat. Options include 1/4, 1/2, 3/4, or 1
second. The default is "1/2" second.

DMI Event Logging

This field keeps track of system events.
T
Event logging Capacity
For example, space available.
T
Event Logging Validity
For example, valid.
T
View DMI Log
Press
Enter
T
Clear all DMI Event Logs
"No" is the default; select "Yes" to clear logs.
T
Event Logging
The default setting for this field is "Enabled."
to view the DMI log.
Technical Information 2-19