Setup And Operation; Site Selection - NEC POWERMATE ENTERPRISE NETPC Service Manual

Section 2

Setup and Operation

This chapter contains information on setting up the PowerMate NetPC system and covers
the following topics:
T

Site selection

T
Installation
T
Startup and shutdown
T
Setup Utility
T
Flash Utility
T
NEC Auto Backup Utility
T
LANDesk Client Manager
T
NEC Select Install CD.
SITE SELECTION
The computer is designed to operate reliably in a normal office environment. Make sure the
site is well ventilated, dust free, and away from heat sources. In addition, choose a site
according to the following criteria:
T
Place the computer on a desktop or other raised, flat surface; do not put the
computer on the floor.
T
Place the computer near a grounded, three-pronged power outlet.
In the United States and Canada, use a NEMA
5-15R outlet for 100-120 VAC or a NEMA 6-15R outlet for 200-240 VAC.
For other geographic regions, use a three-pronged power outlet applicable for
the electrical code of the region.
WARNING: Hazardous voltage, current, and
energy levels are present inside the computer.
Access to the inside is restricted to qualified,
NECCSD-trained personnel. See Chapter 5 for
servicing and parts information.