Section 5
Disassembly and Reassembly
This section describes how to safely remove and replace components in the PowerMate
NetPC system. This section also contains a list of depot-replaceable parts.
SAFETY PROCEDURES
Before attempting any of the procedures described in this section, do the following:
1.
Unplug all power cords, including the system unit, monitor, and any peripherals.
2.
Unplug all data cables, including telephone, network, and peripheral cables.
WARNING: Access to the inside of the system
is restricted. This section is intended for qualified
service personnel trained by NECCSD for
disassembling and reassembling PowerMate
NetPC hardware.