NEC POWERMATE ENTERPRISE NETPC Service Manual page 118

5-2 Disassembly and Reassembly
In addition, observe the following safety guidelines and procedures:
T
To avoid the risk of electric shock and processor overheating, never operate the
computer with the chassis open.
T
Beware of sharp pins and edges on some board and chassis parts.
T
The microprocessor and heat sink can be hot if the system has been running. Let
the heatsink cool before touching it.
T
Always use appropriate protection (such as a wrist strap and floor mat) to prevent
electrostatic discharge damage to static-sensitive components.
CAUTION: This system contains electrostatic-
sensitive components inside the chassis.