Table of Contents
Advertisement
14
PLAYBACK
Shuttle ring
When the tape reaches the end during
playback, fast-forward, or forward
search, the VCR automatically rewinds
the tape to the beginning, ejects the
cassette, and turns the power off.
If Counter Memory (page 19) is set,
the tape stops rewinding when the
tape counter returns to "0:00:00." In
this case, the cassette remains in the
VCR and the power is not turned off.
The VCR selects the tape speed, SP,
LP, or EP (NTSC only) automatically.
"A-TR" does not appear while playing
unrecorded portions of tape.
Playing back a tape
Before starting
¢ Turn on the VCR and the TV and set the TV for VCR reception.
— When the VCR and the TV are connected with a 21-pin scart cable, set the
TV to the video input mode.
— When they are connected with only the aerial cable, set the TV to the VCR
channel.
1
Insert a cassette.
The power turns on automatically.
Playback starts immediately if the erasure prevention tab has been
removed from the cassette.
2
Press ® PLAY to start playback.
To stop playback
Press Mi STOP.
Although the VCR adjusts the tracking automatically, you may needto adjust
the tracking manually if the tape quality is too poor.
While the VCR is adjusting the
TATA
tracking automatically, "A-TR"
(Automatic Tracking) flashes in the
display window. It lights steadily after
the adjustment is complete.
If "A-TR" keeps flashing more than 10
seconds, try manual tracking.
To adjust the tracking manually
During playback, press +/— repeatedly until you get the best possible picture.
'
(Automatic Tracking is cancelled and "A-TR" goes off.)
To return to automatic tracking
Press A-TR.
Advertisement
Table of Contents
