HANGCHA CPCD15 Operation And Maintenance Manual page 73

22. Hazard label (Label for keep clear of mast)
Warning: Danger to your life. If you become
trapped between the mast and instrument
stand or overhead guard, you will be at risk of
serious injury. If it is necessary to inspect or
repair this part, the inspection and repair can
only be carried out after the engine is turned
off. There must be no other people on the
truck; people outside the truck should not
operate the truck to avoid an accident arising
from misuse of the mast lever.
23. Hazard label
Inner and outer masts and fork arm carriers are
sliding parts for lifting and lowering; do not
place your hands between the inner and outer
masts.
If it is necessary to inspect or repair this part,
the inspection and repair can only be carried
out after the engine is turned off. There must
be no other people on the truck; people
outside the truck should not operate the truck
to avoid an accident arising from misuse of the
mast lever.
Serial number print location
Each forklift truck has an unique frame series
number, which is marked on the front right side
of the frame.
T he pri nt posi t i on
of t ruck body
seri se num ber
24、Operating instruction label
4WD:
FW D/ 4W D EXCHANGE S W I TCH
2WD/4WD switch: select 2WD mode in

normal operation 2WD mode: when the
drive axle traction is insufficient, 4WD
mode can be used.
Drive axle differential lock switch: please

turn it off when the truck is running
normally to avoid
any damage to the differential and

potential rollover when turning; when the
drive axle tires slip, the drive axle
differential lock can be used.
In other situations, please use it as

needed. (For details, please refer to the
previous rocker switch content.)
DI FFERENTI AL LOCKER S W I TCH OF
DRI VE AXLE
69