HANGCHA CPCD15 Operation And Maintenance Manual page 23

When the light turns on, it indicates that the
filter of the air intake system is blocked and the
truck must be stopped to clean the filter.
Seat safety belt alarm indicator light (optional
configuration)
When the start key is in the
engine is not started and the driver is not on
the driver's seat. If the safety belt is not
fastened properly, the safety belt alarm
indicator light will turn on.
If the safety belt is not fastened or loose when
the driver is operating the vehicle, the buzzer
alarm will sound and the safety belt alarm
indicator light will turn on at the same time.
This is to remind the driver to safely park and
refasten the safety belt; the buzzer alarm will
then stop and the safety belt alarm indicator
light will turn off.
Low brake pressure alarm indicator light
The indicator light in the 1.5t -3.5t forklift truck
is not operative.
Fault indicator light
When the forklift truck has a fault, the
corresponding fault code will be displayed.
Warning
When any fault code is displayed on the

fault indicator light, the forklift truck
should be shut down for maintenance.
"┃", position, the
2. Operating instructions for instrument keys：
Caution
Please ensure the handbrake is pulled up and
the gear-shifting switch is in the "N" position
before any operations.
Key 1: Move to the
right
Key 2: Move down
or decrease
progressively
Key 3: Function
menu or To confirm
Enter the setting information display interface
after pressing Key 3.
2.1 After-treatment system (1.5t-3.5t forklift
truck does not have this function)
2.2 Speed setting
When the cursor stops at "Speed Setting",
press "Key 3" to enter the speed setting page.
Press "Key 2", the number changes from large
to small, then press "Key 1", the cursor jumps
to the next number; press "Key 2" together
with "Key 1" to set the pulse number and
alarm speed as required, then press "Key 3"
when finished. This completes the speed
19