HANGCHA CPCD15 Operation And Maintenance Manual page 14

The light displays the battery charge status,
turns on when the starting switch is in the
(open) position, and turns off when the engine
is started.
Caution
If the light continues to turn on or flash

during operation, it indicates that the
charging is abnormal and immediate
inspection is required.
Engine oil pressure alarm indicator light
The light displays the pressure status of the
engine lubricating oil, the light turns on when
the starting switch is in the
and turns off when the engine is started.
Caution
If the light continues to turn on or flash

during operation, it indicates that the oil
pressure is less than 0.05MPa and
immediate inspection is required.
Preheat indicator light [diesel forklift truck]
The light turns on for a short period after the
switch is moved to the ┃ (open) position, and
the switch can be moved to the
position to start the engine after the light turns
off.
Oil-water separator indicator light [diesel forklift
truck]
10
┃
┃ (open) position,
(start)
In general, the light turns on when the starting
switch is in the (start) position, and turns off
when the engine is started.
The light turns on after the water precipitation
reaches a certain level when the engine is
running.
If the light continues to turn on or flash when
the engine is running, the engine should be shut
down immediately to discharge water.
Caution
If operation is continued after the light

turns on, the fuel oil injection pump may
be damaged.
Gearbox oil temperature alarm light [hydraulic
forklift]
In normal conditions, the light turns on when
the starting switch is in the
After the engine is started, it will go out. When
the engine is running and the gearbox oil
temperature exceeds the normal range (60 ℃
-120℃), the alarm light will turn on.
Caution
If the alarm light turns on, please stop

operation immediately
engine speed to cool down until the light
turns off. The oil level should be checked
or other
conducted.
Engine fault indicator light [for forklift trucks
with an electronically controlled engine]
(start) position.
and
inspections should
reduce
be