HANGCHA CPCD15 Operation And Maintenance Manual page 45

Press the brake pedal to the bottom to fully
stop the truck before changing the driving
direction; push the lever forward to engage
forward gear I; pull up and push the lever
forward to engage forward gear II from gear I.
Press the brake pedal to slow down if it is
required to reverse; pull back the lever to
engage reverse gear I; pull up and push the
lever back to engage reverse gear II from
reverse gear I.
Caution
The engine can only be started when

the lever is in the neutral position.
Gear I should be used for starting the

forklift truck.
2、
1
2
3
Gear I
Gear II
Gear III
Step on the brake pedal to fully stop the truck
before changing the driving direction; push the
lever forward to engage gear I and then rotate
backward to gear II from gear I; and then push
the lever backward to engage gear III from gear
II. Step on the brake pedal to slow down if it is
required to reverse; and then pull back the
lever to engage gear I.
Caution
 The engine can only be started when the
lever is in the neutral position.
 Gear I should be used for starting the
forklift truck
41