HANGCHA CPCD15 Operation And Maintenance Manual page 6

equipment as well as loading and unloading of containers in wharf yards.
21. In the event of a breakdown, the truck should be first moved to a place where it does not obstruct
traffic. If the breakdown is caused by the brake system or steering system, the truck should be carried
away with a suitable vehicle (see the vehicle handling content); if the breakdown is caused by
something else the truck should be towed with an appropriate vehicle; the rope should be fixed
outside the truck body when towing. Obey traffic rules when towing the truck on the highway.
22. Do not operate the forklift truck or carry cargo after disassembling the internal combustion engine
hood, water tank cover plate, overhead guard, mast backrest or other protective devices.
23. There should be sufficient lighting in the truck working area. Turn on the head lights when working
at night, there should be sufficient lighting in the work area.
24.Do ． ． not ． ． ． conduct ． ． ． ． ． ． ． sideshift ． ． ． ． ． ． ． ． ． operations ． ． ． ． ． ． ． ． ． ． when ． ． ． ． a ． forklift ． ． ． ． ． ． ． ． truck ． ． ． ． ． with ． ． ． ． automatic ． ． ． ． ． ． ． ． ． adjustable ． ． ． ． ． ． ． ． ． ． distance ． ． ． ． ． ． ． ． forks
． ． ． ． ．
is ． ． loaded ． ． ． ． ． ． to ． ． protect ． ． ． ． ． ． ． the ． ． ． forklift ． ． ． ． ． ． ． ． truck ． ． ． ． ． from ． ． ． ． losing ． ． ． ． ． ． balance ． ． ． ． ． ． ． and ． ． ． damaging ． ． ． ． ． ． ． ． components.
． ． ． ． ． ． ． ． ． ． ．
25. Please do not tilt the mast forward or backward or lift the mast to the extreme position during
idling where possible before the hydraulic oil temperature reaches normal operating level.
26. Do not revise or modify the forklift truck without the written approval of the forklift truck
manufacturer; otherwise, it may affect the rated load and stability or safe operations. This includes:
Assembly and disassembly of brakes and steering, changes to the field of vision and accessories. When
the forklift truck manufacturer agrees to revise or modify the truck, they should also agree to update
and revise the bearing nameplate, label, and operation and maintenance manual.
27. If the user modifies the forklift truck without permission, it may cause hazards or risks that the
manufacturer did not consider, and the existing forklift truck risk assessment will become invalid.
Forklift truck refitting outside Europe should conform to regional requirements (see ISO/TS 3691-8).
28. The differential lock is only to be used under poor road conditions or extreme conditions, and long
term use during normal driving will cause serious damage to the tires, drive shafts and other parts of
the forklift truck. Therefore, please push the differential lock switch upward when driving normally.
29.The differential lock must be switched to the power-off state.
30. When driving 4WD rough terrain forklift trucks, 4WD mode can be only used in poor road
conditions or extreme conditions, 2WD mode should be used during normal driving.
31. Please use 2WD mode and reduce the driving speed when turning 4WD rough terrain forklifts on
the highway, gravel roads, or wet, snowy or icy surfaces.
32. The Euro-5 forklift truck is equipped with a Diesel Particulate Filter (DPF), operators should read
the introduction to Euro-5 devices in this manual carefully to avoid the loss of life and property due to
improper operation.
When working in an environment that is not suitable for DPF regeneration, turn on the inhibit mode.
After leaving, disengage inhibit mode so that active regeneration can continue.
34. The exhaust temperature is very high during regeneration, personnel should stay away from the
exhaust pipe.
35. Due to the high regeneration temperature, there should not be any combustible materials near
2