HANGCHA CPCD15 Operation And Maintenance Manual page 22

-120℃), the alarm light will turn on.
Caution
If the alarm light turns on, please stop

operation immediately
engine speed to cool down until the light
turns off. The oil level should be checked
or other inspections
conducted.
Engine fault indicator light [for forklift trucks
with an electronically controlled engine]
When the light turns on, it indicates that there
is a fault and the forklift must be stopped
immediately and the fault must be cleared
based on the engine fault code table.
Maintenance personnel can diagnose the faults
based on the fault code displayed on the fault
code indicator light or connect the ECU
diagnosis interface
equipment to read the fault code information
stored in the ECU.
See the engine manual for details.
Neutral start indicator light
When the truck is temporarily stopped, the
direction lever should be in the neutral
position; when the lever is in the neutral
position, the light turns on.
The truck can only be started when it is in
neutral.
The truck must not be in the neutral position
when driving downhill.
Vehicle-mounted terminal fault indicator light
(standard configuration for domestic vehicles),
OPS indicator light (optional function for export
vehicles)
18
and reduce
should
with the diagnostic
Vehicle-mounted terminal fault indicator light:
the light "！ " turns on when there are any faults
in the vehicle-mounted terminal
communication antenna, positioning antenna
be
and CAN bus, the signal is not normal, or the
vehicle is in a dismantled state. When the light
is on, it is necessary to check the
vehicle-mounted terminal and notify the
service provider.
OPS indicator light: When the light turns on, it
indicates that the driver is not on the driver's
seat or is not sitting properly. The light turns off
when the driver is seated and buckled up.
Parking indicator light
When the light turns on, it indicates that the
parking brake is applied. In order to drive the
forklift, the parking brake lever (e.g. hand
brake lever) should be released; when the lever
is released, the light turns off.
Warning
Driving the truck when the light is on

may cause damage to the engine, drive
system and other components.
Major fault indicator light [for forklift trucks
with an electronically controlled engine]
Air filter alarm indicator light