HANGCHA CPCD15 Operation And Maintenance Manual page 51

III. Safety regulations
1. Only trained and approved operators can
operate the forklift truck.
2. Oil/water leakage,
looseness should
otherwise, the service life of the truck will be
shortened; in severe cases, it may cause an
accident.
Ensure that "key safety parts" are replaced in
regular checks.
Wipe off oil, grease or water on the baseplate,
pedal and control lever.
Shut down the engine, especially the fan when
checking the engine and associated parts.
Take care to avoid scalding when checking the
water tank or silencer.
3. Whenever the truck is found to be faulty,
you should stop operations and report the
condition to the management personnel.
In case of maintenance at height (such as the
mast, front light and back light), take care to
avoid clamping and slipping.
If the alarm indicator light turns on or in case
of any other fault, the forklift truck should be
driven to a safe place for checks or
troubleshooting.
Protect your hands, head and body from
scratching at corners and sharp edges you may
touch during maintenance and repair.
Hang the "fault" sign on the truck as a
reminder.
4. Do not check the fuel oil level, electrolyte or
cooling water and leakage when there is a
naked flame nearby.
Do not smoke to avoid explosions when
checking the battery, refilling with fuel oil or
checking the fuel oil system.
The workplace should be provided with a fire
extinguisher.
Do not refuel when the engine is running.
5. Warm up the forklift truck until the water
temperature is 70℃before operation.
Do not open the water tank lid when the water
temperature is higher than 70℃.
6. The exhaust gas is harmful to the human
body; there should be sufficient ventilation
when the forklift truck is operated in an
enclosed space; the ventilation should be
deformation
be regularly checked;
increased if necessary.
Caution
The forklift may not be used underground.
It may not be used in flammable and
and
explosive environments.
7. Do not get on or off the forklift truck when it
is in use; please use the safety pedal and safety
handrail when getting on or off.
8. Operate the forklift truck only when sitting
properly.
Adjust the seat position for good hand and foot
control before starting.
9. Before start, confirm:
① Whether there are any people near the
forklift truck.
② Whether the front and rear reverse lever is
in the neutral position.
10. Pull up the hand brake when parking on a
flat road; if the truck has to be stopped on a
ramp, a wedge must be placed under the
wheel.
Shut down the engine and take out the key
when the forks are lowered to the ground and
slightly tilted forward.
11. Be stable and accurate when operating the
truck. Avoid emergency stops, emergency
starts or emergency steering.
12. Control the speed and obey traffic signals.
Caution
Obey traffic rules when driving on the
highway or street.
Obey traffic rules when driving on the highway
or street.
13. Pay attention to the driving direction and
keep a good lookout.
47