HANGCHA CPCD15 Operation And Maintenance Manual page 61

Press the horn button and check whether the
sound is normal.
14. Seat adjustment and safety belt check
Pull the seat adjusting lever back, adjust the
driver's seat to a comfortable position for your
hands and feet, release the seat adjusting lever,
and lock it.
Check whether the safety belt works normally.
15. Shift lever
Check whether the shift lever is loose and
whether it is stable when shifting gear.
16. Lift lever, tilt lever and accessory lever
Check that the lift lever, tilt lever and accessory
lever are secure and they return properly.
Increase the engine
operate the lift lever, tilt lever, and accessory
lever, and ensure that the forks can be fully
lifted and lowered and the mast can tilt
forward and backward.
17. Instruments and sensor
Check whether
thermometer, oil thermometer, transmission
oil temperature sensor, fuel sensor, engine
water temperature sensor, oil pressure sensor
and other instruments are normal.
18. Brake and inching pedal check
Slow down and step on the brake pedal; after
stepping on the brake pedal, the brake light
should turn on.
Slow down and step on the inching pedal;
check whether the inching pedal function is
normal.
19. Tire check and tire pressure check
Screw the cap back on after confirming that
there is no air leakage; check whether there is
damage on the tire surface and sides and
whether the rim is deformed.
Unscrew the cap anticlockwise and measure
the tire pressure with an air pressure gauge.
Increase the pressure to the specified value if
it is insufficient.
speed, respectively
the stopwatch,
Warning
The forklift truck tires require very high

pressure to bear loads; tiny deformation
of the rim or surface damage to the tire
may cause an accident.
When using an air compressor, as the

maximum output pressure of the air
compressor is higher than the specified
pressure of tire, the pressure setting
should be adjusted first, see the following
table for tire pressures; over pressurising
may cause a serious accident.
In order to ensure safety, the tire should

be placed in a protective frame during air
inflation.
water
Tire pressures should adopt the new standard
GB/T2982-2014:
4WD:
Model
1.5t-1.8t
2.5t
3t-3.5t
5t
2WD:
Model
1.5t-1.8t
2.5t
3t-3.5t
5t
Driving wheel Steering wheel
(front wheel) (rear wheel)
620kPa
620kPa
550kPa
800kPa
Driving wheel Steering wheel
(front wheel) (rear wheel)
620kPa
620kPa
550kPa
800kPa
470kPa
470kPa
470kPa
370kPa
700kPa
700kPa
700kPa
370kPa
57