HANGCHA CPCD15 Operation And Maintenance Manual page 48

Warning
The engine must be shut down during

maintenance and repairs are carried out
under the internal combustion engine
hood. Take care to prevent your hands
or other body parts from being clamped
by moving parts. However, provided the
hands, feet, head, and body do not
touch the components, if it is necessary
to diagnose the fault by listening for
abnormal noises, it is permissible to
open the internal combustion engine
hood without turning off the engine.
Move the steering wheel forward and lean
the backrest forward before opening the
engine hood.
Return the steering wheel and backrest to
their original positions after closing the
engine hood.
②
Water tank cover plate
The water tank cover plate can be moved
away when the internal combustion engine
hood is closed to check the coolant quantity.
Caution
Reinstall the water tank cover plate
and fasten the bolt with your hands.
Trucks exported to Europe should be fixed with
a hexagon bolt; before moving, it should be
44
①
released with a socket spanner; the bolt
should be tightened with a socket spanner
during reinstallation
Water tank lid and additional water tank
The additional water tank is under the internal
combustion engine hood.
The water tank lid is under the rear cover plate
of the internal combustion engine hood.
Warning
Do not open the water tank lid when

the engine water temperature is higher
than 70 ℃ . Press the lid down and
slightly rotate it to the left to reduce the
pressure in the water tank.
Do not open the water tank lid when

wearing gloves.
The antifreeze is corrosive and toxic and

should be rinsed off when your skin and
body are exposed to it. Keep children
away from the antifreeze.
Fork stop dowel
The fork stop dowel is used when adjusting the
fork spacing. Pull out the stop dowel, rotate by
180°, and adjust the forks to the required
position for the cargo to be unloaded.
1
2
3
Warning
The fork spacing adjustment should be

based on the center line of the forklift
truck and symmetrical on the left and
right sides; the stop dowel should be
tight after adjusting.