Source Technologies ST9917 User Manual page 73

Use printer menus
PDF
Menu item
Scale To Fit
Off*
On
Annotations
Print
Do Not Print*
Print PDF Error
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
PostScript
Menu item
Print PS Error
Off*
On
Minimum Line Width
1–30 (2*)
Lock PS Startup Mode
Off
On*
Font Priority
Resident*
Flash/Disk
Wait Timeout
Off
On* (40 seconds)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Scale the page content to fit the selected paper size.
Specify whether to print annotations in the PDF.
Enable the printing of PDF error.
Description
Print a page that describes the PostScript® error.
Note: When an error occurs, processing of the job stops, the printer
prints an error message, and the rest of the print job is flushed.
Set the minimum stroke width.
Note: Jobs printed in 1200 dpi use the value directly.
Disable the SysStart file.
Note: Enabling the SysStart file exposes your printer or network to a
security risk.
Establish the font search order.
Notes:
•
Resident sets the printer to search its memory for the requested font
before searching the hard disk or intelligent storage drive (ISD).
•
Flash/Disk sets the printer to search the hard disk or ISD for the
requested font before searching the printer memory.
•
This menu item appears only when a hard disk or an ISD is installed.
Enable the printer to wait for more data before canceling a print job.
72