Source Technologies ST9917 User Manual page 61

Use printer menus
Menu item
E‑mail Alerts Setup
E‑mail Setup
Device Password
E‑mail Alerts Setup
E‑mail Setup
Kerberos 5 REALM
E‑mail Alerts Setup
E‑mail Setup
NTLM Domain
E‑mail Alerts Setup
E‑mail Setup
Disable "SMTP server not set up" error (Off*)
Error Prevention
Jam Assist
Off
On*
Error Prevention
Auto Continue
Off
On* (5 seconds)
Auto Continue Time (5*)
Error Prevention
Auto Reboot
Auto Reboot
Reboot when idle
Reboot always*
Reboot never
Error Prevention
Auto Reboot
Max Auto Reboots (2*)
Error Prevention
Auto Reboot
Auto Reboot Window (720*)
Error Prevention
Auto Reboot
Auto Reboot Counter
Error Prevention
Auto Reboot
Reset Auto Reboot Counter
Cancel
Continue
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the password to connect to the SMTP server.
Specify the realm for the Kerberos 5 authentication protocol.
Specify the domain name for the NTLM security protocol.
Disable an SMTP setup error message to appear on the
display.
Set the printer to check for jammed paper automatically.
Let the printer continue processing or printing a job
automatically after clearing certain attendance conditions.
Note: Auto Continue Time is available only in some printer
models.
Set the printer to restart when an error occurs.
Set the number of automatic reboots that the printer can
perform.
Set the number of seconds before the printer performs an
automatic reboot.
Show a read‑only information of the reboot counter.
Reset Auto Reboot Counter.
Note: Reset Auto Reboot Counter is available only in some
printer models.
60