Download Print this page

Source Technologies ST9917 User Manual page 60

Mono laser printers

Advertisement

Use printer menus
Menu item
E‑mail Alerts Setup
E‑mail Setup
Secondary SMTP Gateway
E‑mail Alerts Setup
E‑mail Setup
Secondary SMTP Gateway Port (25*)
E‑mail Alerts Setup
E‑mail Setup
SMTP Timeout (30*)
E‑mail Alerts Setup
E‑mail Setup
Reply Address
E‑mail Alerts Setup
E‑mail Setup
Always use SMTP default Reply Address
(Off*)
E‑mail Alerts Setup
E‑mail Setup
Use SSL/TLS (Disabled*)
E‑mail Alerts Setup
E‑mail Setup
Require Trusted Certificate (On*)
E‑mail Alerts Setup
E‑mail Setup
SMTP Server Authentication (No
authentication required*)
E‑mail Alerts Setup
E‑mail Setup
Device‑Initiated E‑mail (None*)
E‑mail Alerts Setup
E‑mail Setup
User‑Initiated E‑mail (None*)
E‑mail Alerts Setup
E‑mail Setup
Use Active Directory Device Credentials
(Off*)
E‑mail Alerts Setup
E‑mail Setup
Device Userid
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Type the server IP address or host name of your secondary or
backup SMTP server.
Enter the server port number of your secondary or backup
SMTP server.
Specify how long before the printer times out if the SMTP
server does not respond.
Specify a reply address in the e‑mail.
Use the SMTP default Reply Address.
Send an e‑mail using an encrypted link.
Require a trusted certificate when accessing the SMTP server.
Set the authentication type for the SMTP server.
Set whether credentials are required for device‑initiated
e‑mails.
Set whether credentials are required for user‑initiated e‑mails.
Note: This menu item is available only in some printer
models.
Enable user credentials and group designations to connect to
the SMTP server.
Specify the user ID to connect to the SMTP server.
59

Advertisement

loading
Need help?

Need help?

Do you have a question about the ST9917 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

St9920St99214806806854602