Related Manuals for Source Technologies ST9817
Summary of Contents for Source Technologies ST9817
- Page 1 ST9817, ST9820, & ST9821 Quick Reference Guide PN 109321 11401A Granite Street | Charlotte, NC | 800.922.8501 | Sourcetech.com...
-
Page 2: Quick Reference
Adjust the paper guides to match the size of the paper that you Load the paper stack with the printable side facedown, and Quick Reference are loading. then make sure that the side guides fit snugly against the paper. Loading paper Loading trays CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately. -
Page 3: Maintaining The Printer
Loading the multipurpose feeder Flex, fan, and align the paper edges before loading. From the document that you are trying to print, open the Print dialog. Open the multipurpose feeder. If necessary, adjust the settings. Print the document. Note: For details of the function of the printer driver, refer to the Help of the printer driver. -
Page 4: Replacing The Imaging Unit
Remove the used toner cartridge. Remove the toner cartridge. Unpack the new toner cartridge, and then shake it three times Remove the used imaging unit. Close door A. to redistribute the toner. Replacing the imaging unit Open door A. Warning—Potential Damage: To prevent damage from electrostatic discharge, touch any exposed metal frame of the printer before accessing or touching interior areas of the printer. -
Page 5: Clearing Jams
Unpack the new imaging unit, and then shake it three times to Correct loading of paper Incorrect loading of paper redistribute the toner. • Do not load or remove a tray while the printer is printing. Insert the toner cartridge. •... -
Page 6: Paper Jam In Door A
Use recommended paper Jam location • Use only recommended paper or specialty media. Standard bin • Do not load paper that is wrinkled, creased, damp, bent, or curled. Rear door • Flex, fan, and align the paper edges before loading. Tray [x] Multipurpose feeder Door A... -
Page 7: Paper Jam In The Rear Door
CAUTION—HOT SURFACE: The inside of the printer Remove the imaging unit. might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching Note: Make sure that all paper fragments are removed. Warning—Potential Damage: Do not expose the imaging Insert the toner cartridge. -
Page 8: Paper Jam In The Duplex Unit
Warning—Potential Damage: To prevent damage from Note: Make sure that all paper fragments are removed. Note: Make sure that all paper fragments are removed. electrostatic discharge, touch any exposed metal frame of the printer before accessing or touching interior areas of the printer. -
Page 9: Paper Jam In The Multipurpose Feeder
Flex, fan, and align the paper edges before loading. Remove the jammed paper. Note: Make sure that all paper fragments are removed. Reload paper, and then adjust the paper guide. Insert the tray. Paper jam in the multipurpose feeder Remove paper from the multipurpose feeder. Remove the jammed paper.
Need help?
Do you have a question about the ST9817 and is the answer not in the manual?
Questions and answers