Source Technologies ST9917 User Manual page 100

Use printer menus
Print
Menu item
Print Fonts
PCL Fonts
PS Fonts
Print Demo
Demo Page
Print Directory
Network
Menu item
Network Setup Page
Wi‑Fi Direct Connected Clients
Troubleshooting
Menu item
Print Quality Test Pages
Forms Merge
Note: This menu appears only when a hard disk or an intelligent storage drive is installed.
Menu item
Merge Mode
Print*
Data Capture
Disabled
Data Capture Target
Flash*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Print samples and information about the fonts that are available in each printer
language.
Print a page that shows the printer capabilities and supported solutions.
Print the resources that are stored in the flash drive, hard disk, or intelligent
storage drive (ISD).
Note: This menu item appears only when a flash drive, a hard disk, or an ISD
is installed.
Description
Print a page that shows the configured network and wireless settings on the
printer.
Note: This menu item appears only in network printers or printers connected
to print servers.
Print a page that shows the list of devices that are connected to the printer using
Wi‑Fi Direct.
Note: This menu item appears only when Enable Wi‑Fi Direct is set to On.
Description
Print sample pages to identify and correct print quality defects.
Description
Specify the mode of operation for Forms Merge.
Set the target destination where the captured data is forwarded.
Note: This menu item appears only when Merge Mode is set to Data Capture.
99