Source Technologies ST9917 User Manual page 70

Use printer menus
Menu item
Print Area
Normal*
Whole Page
Note: An asterisk (*) next to a value indicates the factory default setting.
Setup
Menu item
Printer Language
PCL Emulation*
PS Emulation
Job Waiting
Off*
On
Job Hold Timeout
0–255 (30*)
Download Target
RAM*
Disk
Resource Save
Off*
On
Print All Order
Alphabetical*
Newest First
Oldest First
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printable area on a sheet of paper.
Description
Set the printer language.
Note: Setting a printer language default does not prevent a software
program from sending print jobs that use another printer language.
Preserve print jobs requiring supplies so that jobs not requiring the missing
supplies can print.
Note: This menu item appears only when a hard disk or an intelligent
storage drive (ISD) is installed.
Set the time in seconds that the printer waits for user intervention before
it holds jobs that require unavailable resources.
Note: This menu item appears only when a hard disk or an ISD is
installed.
Specify where to save all permanent resources that have been
downloaded to the printer.
Note: This menu item appears only when a hard disk or an ISD is
installed.
Determine what the printer does with downloaded resources when it
receives a job that requires more than the available memory.
Notes:
•
When set to Off, the printer retains downloaded resources only until
memory is needed. Resources associated with the inactive printer
language are deleted.
•
When set to On, the printer preserves all the permanent
downloaded resources across all language switches. When
necessary, the printer shows memory full messages instead of
deleting permanent resources.
Specify the order when you choose to print all held and confidential jobs.
69