Source Technologies ST9917 User Manual page 109

Maintain the printer
6
Insert the new imaging unit.
7
Insert the toner cartridge.
8
Close door A.
Replacing MarkNet N8450 Wireless Print Server
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.
Note: This task requires a flat‑head screwdriver.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet, and then from the printer.
3
Open the controller board access cover.
108