Source Technologies ST9917 User Manual page 72

Use printer menus
Menu item
Log Action at End of Frequency
None*
E‑mail Current Log
E‑mail & Delete Current Log
Post Current Log
Post & Delete Current Log
Log Near Full Level
Off
On* (5)
Log Action at Near Full
None*
E‑mail Current Log
E‑mail & Delete Current Log
E‑mail & Delete Oldest Log
Post Current Log
Post & Delete Current Log
Post & Delete Oldest Log
Delete Current Log
Delete Oldest Log
Delete All But Current
Delete All Logs
Log Action at Full
None*
E‑mail & Delete Current Log
E‑mail & Delete Oldest Log
Post & Delete Current Log
Post & Delete Oldest Log
Delete Current Log
Delete Oldest Log
Delete All But Current
Delete All Logs
URL to Post Log
E‑mail Address to Send Logs
Log File Prefix
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify how the printer responds when the frequency threshold expires.
Note: The value defined in Accounting Log Frequency determines when this
action is triggered.
Specify the maximum size of the log file before the printer executes Log Action
at Near Full.
Note: This menu item appears only when a hard disk or an ISD is installed.
Specify how the printer responds when the hard disk or ISD is nearly full.
Note: The value defined in Log Near Full Level determines when this action
is triggered.
Specify how the printer responds when hard disk or ISD usage reaches the
maximum limit (100MB).
Specify where the printer posts job accounting logs.
Specify the email address to which the printer sends job accounting logs.
Specify the prefix for the log files.
Note: The current host name defined in the TCP/IP menu is used as the
default log file prefix.
71